Products 07

Step remover

Products 07
Step remover
One that supports going out in a wheelchair.
It can be operated by one person and does not
require the help of a caregiver. An elevator
that makes everyday outings more enjoyable
for wheelchair users.

Installation location

  • It can be installed indoors and outdoors in various places.

Product features

More space saving than a slope

If you install a slope or ramp as an alternative to steps, it generally requires 12 times the distance of the steps. In this case, you will need to secure a lot of space. The step eliminating machine 『Tasukaru LIFT』 can be installed in a small space, and anyone can easily raise and lower the step because of its easy operation.

4 types by stroke

4 types according to the height of the step. DA-65 with a stroke of 65 cm, DA_100A with a stroke of 100 cm
DA-150A with a stroke of 150 cm, DA-240A with a stroke of 240 cm.

Easy operation

The operation method is very easy. Just turn on the power key switch, get on the table, and then press the button in the direction you want to go with the operation switch. It operates only while you hold it down, so you can prevent malfunctions and use it safely.

Safety bar to prevent falling during operation

The Tasukaru series is designed with safety in mind, but if you lose your posture while driving and fall from the elevator, it may lead to a serious accident.
The high stroke DA-150A and DA_240A are equipped with a blocking bar as standard to prevent accidents. In addition, low stroke DA-65A and DA-100A can be installed as an option.

Key switch to prevent
malfunction and tampering
malfunction and tampering

It is dangerous if the lever is pushed and the machine operates when not in use. There is also the possibility that children will play with it if unsupervised. If the key switch is turned off and pulled out, the elevator will not operate. Be sure to remove the key when not in use.

Reference specifications

1 Safety bar
Prevents falling during operation. (DA-65A / DA-100A are optional)
2 Operation switch
Operation switch used when moving in the vertical direction
3 Automatic storage slope
The slope is automatically stored when the step remover rises (optional)
4 Tables
Getting in the wheelchair
5 Upper bridge
A bridge from the step remover to the upper floor (optional)
Model Tasukaru Lift DA-65A / 100A type
(Indoor ・ outdoor combination type)
Taskaru Lift DA-150A / 240A type
(Indoor ・ outdoor combination type)
For wheelchairs
Capacity 1 person
Load capacity 200kg 185kg
Rated speed 3m/min
Traveling distance 65cm以内(DA-65A)/
100cm以内(DA-100A)
150cm以内(DA-150A)/240cm以内(DA-240A)
Minimum height 8cm
Operation method Press and hold button
(pendant switch)
Drive system Chain sprocket
Electric motor 200w Inverter control
Power supply single-phase AC
Safety device ・ Limit switch ・ Push button   ・ Push button Fixed position detection device ・ Operation key switch   ・ Electromagnetic brake ・ Fall prevention device (chain break detection device)   ・ Contact type obstacle detection device ・ Leakage breaker
Optional ・ Upper overpass bridge ・ Call feed switch ・ Automatic storage slope ・ Power failure descent device ・ Blocking rod (DA-150A / 240A is standard)
>catalog Download
Remarks A hydraulic step remover is also available (reference drawing). Please feel free to contact us.
Consultation

After sales service/
Maintenance

  • The warranty period is one year after delivery.
  • Periodic inspections and legal inspections by professional engineers (separate contract).
  • In the event of a failure, a professional technician will take care of and repair.